SECTION 8 CESSNA
HANDLING, SERVICE & MAINTENANCE MODEL 182T
IDENTIFICATION PLATE
All correspondence regarding your airplane should include the
Serial Number. The Serial Number, Model Number, Production
Certificate Number (PC) and Type Certificate Number (TC) can be
found on the Identification Plate, located on the aft left tailcone. A
secondary Identification Plate is also installed on the lower part of
the left forward doorpost. Located adjacent to the secondary
Identification Plate is the Finish and Trim Plate which contains a
code describing the exterior paint combination of the airplane. The
code may be used in conjunction with an applicable Illustrated Parts
Catalog if finish and trim information is needed.
CESSNA OWNER ADVISORIES
Cessna Owner Advisories are sent to Cessna Aircraft FAA
Registered owners of record at no charge to inform them about
mandatory and/or beneficial aircraft service requirements and
product changes. Copies of the actual bulletins are available from
Cessna Service Stations and Cessna Customer Service.
8-4 Apr 30/01
To Next Page
Loading...
