EasyManua.ls Logo

CF MOTO 300CL-X - Operating Your Vehicle; Break-In Period

CF MOTO 300CL-X
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
Operating Your Vehicle
Break-in Period
The break-in period for this vehicle is the first 1000km� Maintain the vehicle according to the break-in
period requirements�
The following items should be observed during break-in period:
1� Do not run at high engine speeds immediately when the engine is just started� Allow the engine to warm
for 2 ~ 3 minutes at idle speed and let oil ow into all the engine lubricating parts.
2� Do not run the engine at high Rpm when the transmission is in neutral�
3� During the break-in period, CFMOTO suggests the top engine speeds as below:
Total odometer Top engine RPM
0 km ~ 500 km 4000 r/min
500 km ~ 1000 km 6000 r/min
DANGER
New tires are slippery which may lose control and cause damage� Tire pressures should be at the
specied value during the 1000 km break-in period. Avoid sudden and maximum braking/acceleration and
hard cornering during the break-in period�

Table of Contents

Related product manuals