98
Brake Disc Inspection
Inspect brake discs periodically for any damage, out of shape,
cracks or wear� Damaged brake discs may cause braking
failure� Worn-out brake discs reduce the braking distance� If
brake discs are damaged or exceed the wear limit, contact an
authorized dealer to replace with new brake discs immediately�
Inspect the thickness in several positions for front and rear
brake discs�
Front and rear brake discs wear limit: 0.12 in. (3 mm)
Brake Caliper Inspection
Inspect the brake calipers before riding� Inspect the brake pads
for minimum thickness periodically� If the brake pad is too thin,
it will cause the steel plate to rub the brake discs, which will
severely reduce brake eect and damage the brake system.
Inspect the minimum thickness of brake pads on all brake
calipers�
Brake pad minimum thickness: 0.05 in. (1.3 mm)
If the brake pad thickness is less than the minimum limit, or
the brake pad plate is damaged, please contact an authorized
dealer immediately to repair the brake system�
To Next Page
Loading...
