CF MOTO 300CL-X - Tire and Chain; Tire Specification

88
Tire and Chain
This vehicle only uses tubeless tires, rims and inating valves. Only use the recommended standard tires,
rims and inating valves. Do not install inner tube tires on tubeless rims� Do not install a inner tube inside a
tubeless tire� If tires are not installed properly, it may cause tire air leakage�
Tire Specication
Tire specication
Front wheel 110/70R17 M/C 54H
Rear wheel 150/60R17 M/C 66H
Tire pressure
Front wheel 32�6 psi (225 kPa)
Rear wheel 32�6 psi (225 kPa)
Minimum tread depth
Front wheel 0�031 in� ~ 0�039 in� (0�8 mm ~ 1 mm)
Rear wheel 0�031 in� ~ 0�039 in� (0�8 mm ~ 1 mm)
Improper tire pressure or exceeding the tire load limit may a󰀨ect the vehicle handling and performance,
causing a loss of control�
Make periodic inspections of the tire air pressure using a tire pressure gauge� Adjust tire pressure
accordingly�
Excessive low tire pressure may cause tire improper wear or overheating�
Proper tire pressure o󰀨ers the best comfort level and the longest service life.