EasyManua.ls Logo

CF MOTO 300CL-X - Page 89

CF MOTO 300CL-X
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
89
NOTE
:
Inspect the tire pressure when the tires are cold�
Tire pressure is affected by the change of environment temperature and altitude� If the environment
temperature and altitude have a big change during the driving trip, tire pressure should be adjusted and
inspected accordingly
Most countries have their own regulation for minimum tread depth� Please follow local regulations� When
installing new rims or tires, always inspect for wheel balance�
CAUTION
In order to keep the handling safety and stability, please only use the tire and pressure recommended�
If the tire is punctured and repaired or used within 24 hours after repairing, the vehicle speed should not
exceed 100km/h, and cannot exceed 130 km/h at any other time� A punctured tire should be repaired as
soon as possible�
The front and rear tires should come from the same manufacturer, with the same tread pattern�
New tires can be slippery and may cause a loss of control and injury if proper break-in is not performed�
Please drive the vehicle at moderate speeds using di󰀨erent tilt angles to have the tires create friction with
the ground over the entire surface area� Normal friction surface will be formed after a 160km break-in
period� Avoid sudden braking, heavy acceleration, and high speed sharp turns during the break-in period�

Table of Contents

Related product manuals