EasyManua.ls Logo

CF MOTO 300CL-X - Adding Brake Fluid

CF MOTO 300CL-X
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96
Adding Brake Fluid
WARNING
Brake uid causes skin irritation. Rinse the a󰀨ected area with plenty of water in the event of contact with
the skin�
Keep brake uid out of the reach of children.
Keep brake uid away from skin, eyes or clothing. Wear protective clothing and goggles when required.
Consult a doctor immediately if brake uid has been swallowed.
Rinse eyes thoroughly with water immediately and consult a doctor if brake uid comes into contact with
the eyes�
If brake uid spills onto your clothing, change the clothing.
WARNING
Brake uid used for long time without replacement will reduce braking e󰀩ciency. Please change the brake
uid according to the Periodical Maintenance Schedule. Only use the same type DOT3 or DOT4 brake
uid as marked on the uid reservoir. The mixing of di󰀨erent brake uid types may cause brake system
damage or failure. Please contact your authorized CFMOTO dealer for brake uid maintenance.
NOTE
When the brake uid level goes down, it causes negative pressure inside the uid reservoir, which may
lead to reservoir gasket sag� Remove the reservoir cap to release the pressure� Adjust the reservoir
gasket and then install the gasket and cap�

Table of Contents

Related product manuals