2 Read carefully before use
Please read the following carefully.
2.1 Package content
Make sure that the package content is complete. If not, please contact your authorized dealer. Your package should contain:
• M1.1 power amplifier with one (mono bridged or mono passive bi-amp modes only) or two input boards, depending on
the ordered configuration
• A power cord
• Four adjustment steel spikes
• A suction cup (used to unscrew the top covers)
• An accessory box containing:
◦ a spike adjustment screwdriver
◦ a Torx 10 screwdriver
◦ four stacking covers
◦ a USB stick containing the latest CH Precision firmwares.
◦ a set of four CH Support Discs
Please store the packaging material for future use. Check your M1.1 power amplifier for any apparent damage. In case of
damage, please contact your authorized dealer. If your M1.1 power amplifier is still very cold from transport, please let it warm up
to room temperature in order to avoid condensation inside the unit.
2.2 Safety notice
Make sure to observe the following rules:
• Install your M1.1 power amplifier on a stable base
• Do not install your M1.1 power amplifier near water
• Always handle with care. The M1.1 power amplifier is very heavy so have someone to help you when moving it around
• Do not expose the unit to any kind of liquids
• Do not install it under direct sunlight or near any heat source such as radiators or other apparatus generating heat
12 M1.1 User Manual Rev 3.0
To Next Page
Loading...
