CH M1.1 - Display Settings

Mono active bi-amp
Mono passive bi-amp
Bridge
Monaural 1
Monaural 2
2 input boards
None
None
None
None
GAIN 24 dB range by 0.5 dB steps Stereo or bridged mode
GAIN 1 /
GAIN 2
24 dB range by 0.5 dB steps Bi-amp mode
INPUT BOARD Left, Right 2 input boards + passive bi-amp or bridged mode
Details of the AUDIO SETTINGS menu
4.3.1.2 DISPLAY SETTINGS
The M1.1 SETUP >> DISPLAY SETTINGS menu allows configuration of the display
related Parameters of the unit. Accessible Parameters are:
- DISPLAY MODE:
- LED ON/OFF:
- BRIGHTNESS NORMAL:
- BRIGHTNESS DIMMED:
- COLOR:
- GAMMA:
Selects what is displayed in normal mode
Selects if the LED is turned on
Sets the normal display brightness
Sets the dimmed display brightness
Selects the display color
Fine tunes the AMOLED's display RGB gamma curve
The following table details the Parameters of the DISPLAY SETTINGS menu:
PARAMETER PARAMETER VALUES REMARKS
DISPLAY MODE Status
Power
Temperature
Off
None
LED ON/OFF On
Off
None
BRIGHTNESS NORMAL 10%
20%
30%
...
90%
100%
None
BRIGHTNESS DIMMED 10%
20%
None
Rev 3.0 M1.1 User Manual 33
M1 SETUP >> DISPLAY SETTINGS
DISPLAY MODE
LED ON/OFF
BRIGHTNESS NORMAL
BRIGHTNESS DIMMED
...
Status
Off
80%
20 %