of protection to your unit. Therefore, keep the packaging in a dry and clean place for future use.
Besides, we recommend to remove the adjustment spikes and to put them into the X1 box for transportation. Indeed, vibrations
during transport may cause the adjustment spikes to move from their fully retracted position. There is a risk of scratching the piece
of furniture the unit is installed onto if the spikes are not fully retracted.
2.6 Cleaning
Use a soft, dry towel or cloth for cleaning. Never use any solvent or liquids as they may damage the surface or penetrate inside
the unit.
2.7 Maintenance and service
The X1 external power supply contains no user serviceable parts. Do not try to open, modify or repair your X1 yourself. This will
void any warranty. Your X1 must be checked by a qualified technician in any of the following cases:
• The unit is not functioning properly
• The mains cable or the power cord receptacle is damaged
• The Power Link Cable or M23 19-poles connector is damaged
• The unit has been dropped or presents external damage
• The X1 has been exposed to liquids (such as rain) or unknown substances
Rev 2.1 X1 User Manual 11
To Next Page
Loading...