9
P
r
o
g
.
h
m
Day
M
anual switch
Summer and
w
inter time
s
etting
R
eset
Enter
weekday/s
E
nter
t
he hours
Week-
d
ays
f
lash
E
nter
m
inutes
E
nter
s
witching
times
I
mput
t
ime
Operating the time switch
The steps marked with the symbol “ ” are necessary to carry out a switching program.
Preparing for Operation
Activate the “Res” switch (=RESET) to reset the time switch to its default setting (activate using a pencil or similar pointed
instrument). Do this:
- every time you wish to “reset” the time switch
- to erase all switching times and the current time of day.
After approximately two seconds the following display appears:
Enter current time and weekday
- Keep the “ ” key pressed down
During the summer time period press the +/- 1h key once.
Enter the hour using the “h” key
Enter the minutes using the “m” key
Enter the day using the “Day” key
1 = “Monday”..............7 = Sunday
- Release the “ ” key.
6.3 Setting the Digital Clock
6. Setting the Time Clock (continued)