Need help?Do you have a question about the CHAFFOTEAUX EXPERT CONTROL and is the answer not in the manual?
General| Type | Remote Control |
|---|---|
| Brand | Chaffoteaux |
| Model | Expert Control |
| Category | Remote Control |
| Compatibility | Chaffoteaux boilers |
| Power Source | Battery |
| Display | LCD |
| Features | programming |
Explains the meaning of warning symbols used throughout the manual for safety.
Advises on device usage by persons with reduced abilities and child supervision.
Provides detailed technical specifications including power, temperature, and conformity standards.
Details the physical buttons and the display screen layout of the control interface.
Lists and explains the various symbols that appear on the device's display screen.
Allows adjustment of display parameters such as language, brightness, and backlight.
Procedure for setting the current date and time on the system interface.
Instructions for selecting between Summer, Winter, Heating Only, or Off modes.
Explains how to switch between programmed heating schedules and manual operation.
How to set the desired room temperature directly in manual operating mode.
Procedure for temporarily modifying room temperature within a scheduled program.
Details on setting the flow temperature and CH mode for the heating circuit.
Instructions for setting the desired domestic hot water temperature for different zones.
Guide to programming custom heating schedules, including comfort and reduced temperatures.
Steps to select days and program heating periods for specific times of the week.
Procedure to disable schedule programming and maintain constant heating.
Setting the desired temperature for domestic hot water to enhance comfort and reduce standby time.
Configuration of the comfort function for reducing standby time and managing heating elements.
Programming domestic hot water production times and comfort/reduced temperatures.
Selecting pre-configured programs for domestic hot water to simplify scheduling.
Deactivates heating during holidays and allows setting the return date for system resumption.
Automatically adjusts system operation based on installation type and environmental conditions.
Limits heat pump power to reduce noise, with options for activation time and duration.
Displays energy produced by solar panels and CO2 savings compared to car mileage.
Shows hot water availability percentage and number of showers, with an option to reset reports.
Recommendations for choosing an installation site to ensure accurate temperature detection.
Detailed steps for physically mounting the system interface onto the wall base.
Instructions for connecting the system interface to the boiler's PCB via the BUS connector.
Emphasizes that installation and commissioning must be done by a qualified technician.
Procedure for inserting the interface, connecting it, and selecting the initial language.
Steps to enter the technical area using a specific code for advanced configuration options.
Guide to navigating the comprehensive menu structure for all system parameters.
Using the wizard to configure connected devices like Solar Control, Energy Manager, and Boiler.
Setting essential parameters for the correct operation of the boiler.
Step-by-step procedures for system filling, air purge, and exhaust analysis.
Using test modes to check components and service options for storing technical data.
Setting temperature range, thermoregulation type, slope, and offset for Zone 1.
Configuring thermoregulation types and adjusting heating curves based on system type.
Adjusting the influence of the room sensor on flow temperature calculation.
Setting the maximum and minimum allowable temperature values for the system.
List of error codes from 1.01 to 2.P8 and their corresponding descriptions.
List of error codes from 3.01 to 4.35 and their corresponding descriptions.
List of error codes from 5.01 to 7.25 and their corresponding descriptions.
List of error codes from 9.01 to 9.42 and their corresponding descriptions.
To Next Page
