74
GB
room temperature adjustment
Modifying the room temperature
Scheduled room temperature adjustment
programming
Depending on the chosen operating
mode, programmed or manual.
Room temperature adjustment in ma-
nual mode
Turn the knob to set the desired room
temperature value. The display will vi-
sualise the set value.
Press the OK button to confi rm.
The display returns to the previous vi-
sualisation.
Scheduled room temperature adjust-
ment programming
During operation in scheduled program-
ming mode, the set room temperature
can be changed temporarily.
Turn the knob to set the desired room
temperature value. Press the OK button.
The display shows the set tempera-
ture and the time at which you want the
change to end.
Turn the knob to set the change end time
and press the OK button to confi rm.
The display shows the symbol “
”
alongside the desired temperature value
set for the change period.
Press the back button “
“ to exit ad-
justment without saving the changes.
The EXPERT CONTROL system interface
will maintain the temperature value until
the end of the set time period, when the
pre-set room temperature is restored.
To Next Page
Loading...
Need help?
General
