75
GB
heating hot water setting
To access the heating settings, press the
OK button.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- CH settings
Press the OK button.
To set the fl ow temperature, turn the
knob and select:
- CH Setpoint temperature
Press the OK button.
The display screen shows:
- T set Z1
- T set Z2
- T set Z3
Turn the knob and select:
- T set Z1
Press the OK button.
Turn the knob and set the fl ow tempera-
ture for the selected zone.
Press the OK button to confi rm.
Repeat the above procedure to set the
fl ow temperature for the other zones, if
applicable.
Press the back button "
" twice.
Turn the knob and select:
- CH mode
(only in HP systems)
Press the OK button.
Turn the knob and set the operating mode
of the heating elements:
- Green (excludes the use of heating ele-
ments)
- Standard (sets the normal operation of
the heating circuit)
Selecting Heating settings
Change heating hot water temperature
To Next Page
Loading...
Need help?
General
