Challenger Lifts SA10 User Manual

Rev. 10/01/15
Installation, Operation & Maintenance Manual
Two Post
Surface Mounted Lift
MODEL SA10
(This lift may be installed either symmetrically or asymmetrically)
10,000 LBS. CAPACITY (2500 lbs. per Arm)
200 Cabel Street, P.O. Box 3944 Louisville, Kentucky 40201-3944
Email:sales@challengerlifts.com Web site:www.challengerlifts.com
Office 800-648-5438 / 502-625-0700 Fax 502-587-1933
IMPORTANT: READ THIS MANUAL COMPLETELY BEFORE
INSTALLING or OPERATING LIFT

Challenger Lifts SA10 Specifications

General

Lifting Capacity	10, 000 lbs
Motor	2 HP
ALI Certified	Yes
Type	2-Post Lift
Power Requirement	220V, 1PH
Voltage	220V
Power Requirements	220V, 1PH

Summary

General Specifications

Safety Notices and Decals

Installation Procedures

Required Tools for Installation

List of tools needed for lift installation.

Service Bay Layout and Positioning

Instructions for positioning the lift in the service bay.

Disassembly of Packaged Lift

Steps for removing parts from the packaged lift.

Column Extension Assembly

Steps for assembling column extensions.

Anchoring and Column Shimming

Overhead Assembly

Asymmetric Configuration Steps

Synchronizer Cable Installation

Hydraulic Hose Routing and Connection

Lock Release Mechanism Setup

Arm Installation and Electrical Connections

Asymmetric Arm Installation

Procedures for installing arms in asymmetric configuration.

Foot Pad Preparation and Installation

Instructions for preparing and installing foot pads.

Electrical Wiring and Connections

Electrical connection and wiring instructions.

Final Adjustments and Column Lubrication

Column Decal Placement

Instructions for applying safety and logo decals.

Hydraulic System Bleeding and Testing

Steps for bleeding air and testing the hydraulic system.

Synchronizer Cable Tension Adjustment

Adjusting synchronizer cables for proper operation.

Lock Release Cable Tension Adjustment

Adjusting lock release cable tension for simultaneous engagement.

Cylinder Clamp Ring Installation

Installing cylinder clamp rings.

Column Slide Track Lubrication

Lubricating column slide tracks with heavy grease.

Wiring Diagram

Operation Procedure

Safety Decals and Notices

Information on safety warning labels and their importance.

Owner and Employer Responsibilities

Duties of owners and employers regarding lift safety and maintenance.

Important Safety Instructions

General safety precautions for operating the lift.

Vehicle Lifting and Lowering

Lowering a Vehicle Safely

Steps for safely lowering a vehicle from the lift.

Loss of Power Troubleshooting

Troubleshooting steps for power loss or lock retraction issues.

Maintenance Guidelines

Parts Breakdown