EasyManuals Logo

Challenger MT755E Workshop Service Manual

Default Icon
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
explosive. Repair such components in a well ventilated area away from open flames or sparks.
Inspect all lines and hoses for wear or for deterioration and replace if necessary.
Route hoses correctly. Lines and hoses must have sucient support and secure clamps. Tighten all
connections to recommended torque.
1.1.30 Fire extinguisher
Make sure that a fire extinguisher is available and be familiar with the operation. Inspect and service the
fire extinguisher regularly. Obey the recommendations on the instruction plate.
An optional mounting bracket can be installed on the front frame rail.
The bracket is designed to hold a 4.5 kg (10 lb)extinguisher.
Do not weld a bracket on the cab ROPS frame to install the fire extinguisher.
Do not drill holes in the cab ROPS frame to mount the fire extinguisher.
Make sure all the clamps , the guards, and the heat shields are installed correctly to prevent vibration,
rubbing, and excessive heat during the machine operation.
1.1.31 Public road transportation
Always walk around and visually examine the machine before moving on a public road. As a warning to
others in the area, honk the horn two times before starting engine. Do a check for damage and/or defective
components that can make a dangerous condition. Make sure all machine systems operate correctly
including (but not limited to):
front road lamps
tail and brake lamps
amber hazard lights
parking brake
horn
windshield wiper and washer
rear view mirrors
etc.
Repair or replace a component not in correct operating order.
Do not drive at a speed causing machine to lose control.
Obey all trac rules. Operate the machine with hazard lights on, unless prevented by law. The operation of
work lamps while driving on public roads is prohibited. Use of road lamps while moving on public roads is
the operator's responsibility.
NOTE:
When the Speed Indication Symbol (SIS) is installed in the rear window, be sure to close the rear window
when transporting the machine on the road.
GUID-BB2F4A8C-9E74-4ED4-B9E5-510F3EBC9A63 [V4]
GUID-83333B29-DD08-4E83-9040-BB07F2BF96DE [V3]
1. General
Rubber Track Tractor 1-15
79036614D

Table of Contents

Other manuals for Challenger MT755E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Challenger MT755E and is the answer not in the manual?

Challenger MT755E Specifications

General IconGeneral
BrandChallenger
ModelMT755E
CategoryTractor
LanguageEnglish

Related product manuals