1.2 Safety signs and labels
There are several specific safety signs on this machine. The exact location of the hazards and the
description of the hazards are reviewed in this section.
Become familiarized with all of the safety signs. Make sure all of the safety signs are legible. Clean the
safety signs or replace the safety signs if you cannot read the words. When cleaning the safety signs, use
a cloth, water, and soap. Do not use a solvent, gasoline, or other harsh chemicals. Solvents, gasoline, or
harsh chemicals can loosen the adhesive that secures the safety sign. Loose adhesive will allow the safety
sign to fall off.
Replace any safety sign that is damaged or missing.
If a safety sign is attached to a part of the machine that is replaced, install a safety sign on the replacement
part. Any AGCO dealer can provide new safety signs.
WARNING:
Do not remove or block any safety sign or instruction sign.
GUID-075D7460-D97A-4335-9F3E-6F86CFC18490 [V2]
1. Safety
Articulated Tractor 25
582773D1C
To Next Page
Loading...
Need help?
General
