2.22.6 Fitting the low pressure turbochargers with the mounting bracket ...............2-268
2.22.7 Removing the turbocharger ...........................................2-269
2.22.8 Checking the turbocharger ............................................2-269
2.22.9 Fitting the high pressure turbocharger ...................................2-270
2.22.10 Removing the EGR coolers ..........................................2-270
2.22.11 Fitting the EGR coolers .............................................2-271
2.22.12 Removing the EGR actuator ..........................................2-271
2.22.13 Fitting the EGR actuator .............................................2-271
2.22.14 EGR link rod .....................................................2-272
2.22.15 Checking the EGR actuator voltages ...................................2-272
2.22.16 Removing the ICACs with the mounting bracket ...........................2-273
2.22.17 Fitting the ICACs with the mounting bracket ..............................2-273
2.23 Fuel system .........................................................2-275
2.23.1 Bleeding the fuel system .............................................2-275
2.23.2 Measuring fuel feed pressure ..........................................2-275
2.23.3 Inspecting injectors .................................................2-276
2.23.3.1 Removing the injectors (CRIN3) ..................................2-276
2.23.3.2 Fitting the injectors (CRIN3) .....................................2-277
2.23.4 High-pressure pump ................................................2-278
2.23.4.1 Removing the high-pressure pump ...............................2-278
2.23.4.2 Install the high-pressure pump ...................................2-279
2.23.5 Rail .............................................................2-281
2.23.5.1 Removing the rail ............................................2-282
2.23.5.2 Fitting the rail ...............................................2-282
2.23.5.3 Removing the pressure control valve ..............................2-282
2.23.5.4 Fitting the pressure control valve .................................2-283
2.23.5.5 Removing the pressure sensor ..................................2-283
2.23.5.6 Fitting the pressure sensor .....................................2-284
2.24 SCR System .........................................................2-285
2.24.1 SCR system maintenance ............................................2-285
2.24.2 Mounting of SCR system components ...................................2-285
2.25 Engine control system ................................................2-287
2.25.1 Change the electronic control unit ......................................2-287
2.25.1.1 Fitting the wiring .............................................2-288
2.26 Terminal diagram ....................................................2-289
Table of contents
2-4 Articulated Tractor
79036231D
To Next Page
Loading...
