Chamberlain LiftMaster Security+ 3800E User Manual

Owner’s Manual
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ The door WILL NOT CLOSE unless The Protector System
®
and cable tension monitor are
connected and properly aligned.
■ Periodic checks of the opener are required to ensure safe operation.
■ The model number label is located behind the hinged door of your opener.
GARAGE DOOR OPENER
Model 3800E
For Residential Sectional Doors With
Torsion Assemblies Only
®
C
o
m
p
a
t
i
b
l
e
w
i
t
h
S
e
e
P
a
g
e
1
3
f
o
r
D
e
t
a
i
l
s

Chamberlain LiftMaster Security+ 3800E Specifications

General

Brand	Chamberlain
Model	LiftMaster Security+ 3800E
Category	Garage Door Opener
Language	English

Summary

LiftMaster 3800E Manual Introduction and Planning

Manual Overview and Initial Safety Warnings

Provides essential safety guidelines and how to handle the manual.

Installation Site Requirements and Compatibility

Pre-Installation Preparation

Garage Door Preparation and Balance Test

Motor Unit Assembly and Mounting

Attach Collar and Mounting Bracket

Positioning the Opener Unit on Torsion Bar

Sliding and securing the motor unit onto the torsion bar.

Installing Safety and Control Features

Emergency Release and Power Door Lock

Cable Tension Monitor Installation

Electrical Connections and Sensor Setup

Electrical Requirements and Wiring Procedures

Connecting power and following wiring safety guidelines.

Install and Align Safety Reversing Sensors

Mounting and aligning the Protector System® sensors.

Opener Adjustments and Safety Testing

Programming Travel Limits and Door Force

Setting door open/close positions and force requirements.

Testing Safety Reversal and Protector System

Verifying safety features like reversal and sensor beam.

Testing Cable Tension Monitor and Power Lock

Opener Operation and Maintenance

Basic Operation and Safety Guidelines

Maintenance Schedule and Troubleshooting Guide

Regular care tasks and solutions for operational problems.

Programming, Diagnostics, and Parts Information

Smart Control Panel™™ Messages and Diagnostics

Programming Remote Controls and Keyless Entry

Steps to add or reprogram remotes and keypads.