EasyManua.ls Logo

Chamberlain PD220 User Manual

Chamberlain PD220
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.chamberlain.com
CONTENTS
Preparation .............................. 1-4
Assembly ................................. 5-9
Installation ............................ 10-17
Install the Door Control ............. 18-19
Install the Protector System
®
...... 20-23
Power .................................. 24-25
Adjustments .......................... 26-28
Operation.................................. 29
Features ................................... 30
Remote Control .......................... 31
To Erase the Memory .................... 32
To Open the Door Manually ............ 32
Maintenance .............................. 33
Diagnostic Chart ......................... 34
Warranty .................................. 35
Chain Drive
Garage Door Opener
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
Periodic checks of the garage door opener are required to ensure safe operation.
The model number label is located on the back panel of your garage door opener.
This garage door opener is compatible with Security 2.0™ accessories.
Serial Number:
Date of Purchase:
Model Number:
Models HD220, HD220C,
PD220, PD222, LW260C,
and LW2200
FOR RESIDENTIAL USE ONLY
INSTALL ON 7 FOOT
SECTIONAL DOORS ONLY
Register your new garage door opener at
www.prodregister.com/chamberlain or
scan the QR code with your smartphone
Write down the following information
for future reference:

Other manuals for Chamberlain PD220

Question and Answer IconNeed help?

Do you have a question about the Chamberlain PD220 and is the answer not in the manual?

Chamberlain PD220 Specifications

General IconGeneral
BrandChamberlain
ModelPD220
CategoryGarage Door Opener
LanguageEnglish

Summary

Preparation

Safety Symbol and Signal Word Review

Review of safety symbols and signal words used in the manual to alert users to potential hazards.

Check the Door for Balance and Smooth Operation

Ensuring the garage door is balanced, binds-free, and the bottom seal is within specifications for safe opener operation.

Additional Items You May Need

Lists items that may be required for installation based on garage construction and door type.

Tools Needed

Illustrates and lists the tools required for assembling and installing the garage door opener.

Carton Inventory/Repair Parts

Details the contents of the garage door opener carton and lists part numbers for various components.

Hardware Inventory Overview

Presents a comprehensive list and illustrations of all assembly and installation hardware provided.

Assembly

Assemble the Rail and Trolley

Instructions for assembling the garage door opener rail and attaching the trolley.

Fasten the Rail to the Motor Unit

Procedure for securely attaching the assembled rail to the main garage door opener motor unit.

Install the Pulley

Guidance on correctly installing the idler pulley and securing it with the provided hardware.

Install the Chain

Steps for properly routing and connecting the chain to the trolley and motor unit sprocket.

Tighten the Chain

Instructions for adjusting and tightening the chain to the correct tension for opener operation.

Installation

Important Installation Instructions and Warnings

Critical safety warnings and general instructions to follow before and during garage door opener installation.

Determine Header Bracket Location

Guidance on locating and marking the correct position for the header bracket on the garage wall or ceiling.

Install Header Bracket

Step-by-step instructions for securely mounting the header bracket to structural supports.

Attach Rail and Position Opener

Steps to attach the rail to the header bracket and position the opener unit for hanging.

Hang Garage Door Opener

Instructions for securely hanging the garage door opener unit to structural supports.

Install Light Bulbs and Attach Release Rope

Procedures for installing light bulbs into the opener and attaching the emergency release rope and handle.

Install Door Bracket

Instructions for installing the door bracket onto the garage door, including reinforcement considerations.

Connect Door Arm to Trolley

Steps for connecting the straight and curved door arms to the opener trolley and the door bracket.

Install Door Control

Instructions for mounting the wall-mounted door control and wiring it to the garage door opener.

Wire Door Control and Attach Labels

Steps for wiring the door control to the opener and attaching required warning and safety labels.

Install Protector System

Guidance on installing the safety reversing sensors, including track, wall, and floor mounting options.

Wire Safety Reversing Sensors

Instructions for wiring the safety reversing sensors to the garage door opener, covering pre-wired and new installations.

Connect Power

Details on connecting the garage door opener to a power source, including typical and permanent wiring methods.

Align Safety Reversing Sensors

Procedure for aligning the safety reversing sensors to ensure proper operation and the door's ability to close.

Adjustments

Introduction and Programming Buttons

Overview of the opener's electronic controls for setup and adjustments, and location of programming buttons.

Program the Travel Limits

Step-by-step guide to setting the garage door's open (UP) and close (DOWN) travel limits.

Test the Safety Reversal System

Procedure for testing the safety reversal system by using a test obstruction and ensuring the door reverses.

Test the Protector System

Testing the functionality of the safety reversing sensors to ensure the door stops and reverses if obstructed.

Operation

Important Safety Instructions

Critical safety guidelines for operating the garage door opener to prevent injury or death.

Key Features Overview

Highlights major features including remote controls, lights, protector system, and energy conservation.

Using Your Garage Door Opener

How to activate the opener using wall control, remote, or keyless entry, and how it responds to obstructions.

Remote Control Operation

Information on using the remote control, its factory programming, and compatibility with accessories.

Add, Reprogram, or Change Remote Control/Keyless Entry PIN

Procedure for adding, reprogramming, or changing PINs for remote controls and keyless entry devices.

Manual Door Operation and Memory Erase

Instructions on how to open the door manually using the release handle and how to erase all remote control memory.

Maintenance

Maintenance Schedule

Recommended monthly and yearly checks and maintenance tasks for the garage door opener.

Remote Control Battery Replacement

Instructions and warnings for replacing the battery in the remote control unit.

Troubleshooting

Diagnostic Chart

A chart correlating diagnostic codes (flashing arrows) with symptoms and their corresponding solutions.

Warranty

Important Warranty Information

Details of the limited warranty, contact information for service, and warranty exclusions.

Related product manuals