App Salt Monitoring Update
The recent release of Legacy View, version 3.1.18, adds Salt Monitoring to the existing generation of residential
and commercial metered softeners that are running the C4.22 rmware. Below is an overview of the new func-
tionality.
General Setup and Use
will see a new item on the dashboard called, “Brine
Tank Level” and it will display “Click to Setup” to indi-
Once you tap “Click to setup” or “Set”-
For residential metered softeners, this will default to a
inches.
For commercial metered softeners, this will default to a
inches. Note that the commercial brine tanks will also
include the 24 inch and 30 inch brine tank option.
enter the current salt level in the tank by either tapping
the brine tank or sliding up and down to the desired
position. This will need updated every time you add
salt to your brine tank. You can also adjust the initial
“Salt Monitoring” section).
A
10
Chandler Systems
10
To Next Page
Loading...