Changan BENNI MINI 2011 - Page 36

201-00-16 Suspension System-General Information
Diagnosis and Testing (Continued)
• Swaying of the Vehicle Body
• Abrasion of the connecting rod or
bearing of the front direction
stabilizing rod (if equipped)
• Replace the connecting rod or axle
bushing of the front direction
stabilizing rod. See Section 201-01
for relevant information.
• Loosening or abrasion of the lowe
r
cross arm of the front suspension
• Repair or replace the axle bushing
of the lower cross arm of the front
suspension. See Section 201-01 for
relevant information.
• Loosening or abrasion of the
suspension assembly
• Check the suspension assembly.
See Sections 201-01 (former) and
201-02 (latter) for relevant
information.
•Incline of the Vehicle Body
•Softening or damage of the front or
rear damping springs
• Check the shock absorbing springs.
See Sections 201-01 (former) and
201-02 (latter) for relevant
information.
• Inappropriate tyre air pressure • Adjust the tyre air pressure.
• Poor Running Comfort
•Softening of the front or rear
damping springs
• Check the shock absorbing springs.
See Sections 201-01 (former) and
201-02 (latter) for relevant
information.
• Abrasion of the front or rear
suspension assembly
• Check the suspension assembly.
See Sections 201-01 (former) and
201-02 (latter) for relevant
information.
• Unsteady Direction
• Unbalance and damage or
excessive run-out amount of the
tyres
• Check the tyres. See Section
201-03 for relevant information.
• The front toe-in value is out of the
regulated scope.
• Perform the wheel alignment. See
this section for relevant
information.
• Abrasion of the steering system
• Check the steering system. See
Section 204-00 for relevant
information.
• Damage of the ball head of the
lower cross arm of the front
suspension
• Replace the ball head of the lower
cross arm of the front suspension.
See Section 201-01 for relevant
information.
•Softening of the front or rear
damping springs
• Check the shock absorbing springs.
See sections 201-01 (former) and
201-02 (latter) for relevant
information.
• Abrasion of the front or rear
suspension assembly
• Check the suspension assembly.
See sections 201-01 (former) and
201-02 (latter) for relevant
information.
Benni Mini