201-00-16 Suspension System-General Information
Diagnosis and Testing (Continued)
• Loosening and abrasion of the rear
suspension, axle bushing or bolts.
• Check the rear suspension. See
Section 201-02 for relevant
information.
• Abrasion of the axle bushing or
connecting rod of the direction
stabilizing rod
• Replace the axle bushing or
connecting rod of the direction
stabilizing rod. See Section 201-01
for relevant information.
• Abnormal Return of the Steering
Wheel
• Abnormal wheel alignment
• Perform the wheel alignment. See
this section for relevant
information.
• Abrasion of the steering system
• Check the steering system. See
Section 204-00 for relevant
information.
• Abrasion of the ball head of the
lower cross arm of the front
suspension
• Replace the ball head of the lower
cross arm of the front suspension.
See Section 201-01 for relevant
information.
• The Derivation to One Side of the
Steering Wheel
• Unbalance and damage or
excessive run-out amount of the
tyres
• Check the tyres. See Section
201-03 for relevant information.
•Abrasion of the braking system
• Check the braking system. See
Section 203-00 for relevant
information.
• Abrasion of the steering system
• Check the steering system. See
Section 204-00 for relevant
information.
•Incorrect wheel alignment
• Perform the wheel alignment. See
this section for relevant
information.
• Damage or jamming of the ball
head of the lower cross arm of the
front suspension.
• Replace the ball head of the lower
cross arm of the front suspension.
See Section 201-01 for relevant
information.
•Softening of the front shock
absorbing spring
• Check the front shock absorbing
spring. See Section 201-01 for
relevant information.
• Damage or loosening of the axle
bushing of the lower cross arm of
the front suspension
• Repair or replace the axle bushing
of the lower cross arm of the front
suspension. See Section 201-01 for
relevant information.
• Abnormal Noise of the Suspension
System
•Damage or jamming of the ball
head of the lower cross arm of the
front suspension.
• Replace the ball head of the lower
cross arm of the front suspension.
See Section 201-01 for relevant
information.
• The loosening and abrasion of the
front direction stabilizing rod (if
equipped)
• Repair or replace the direction
stabilizing rod. See Section 201-01
for relevant information.
Benni Mini
To Next Page
Loading...
