202-01-14 Driving Axle 202-01-14
DISASSEMBLING AND INSTALLATION
BENNI MINI
Dust shield of the inner constant speed universal joint
Using the special tool: installation tool (CA201-008)
General Tool
Retaining ring caliper
Name
Model
High performance grease
G.A.Cpalex GTE
Tape
Disassembly
1．Warning: The hexagonal socket wrench Is used
to prevent the piston rod from rotating.
Loosen the fixing nuts on the supporting column of
the suspension.
2. Hoist the vehicle.
3. Disassemble the front oscillating arm on the
steering knuckle.
4. Notes: Use the protective shield.
Loosen the nip of the dust shield from the transmission
end. The sliding dust shield is nested on the driving
axle.
5. Disassemble the three-ball-pin type universal
joint.
Eliminate the universal joint inner grease.
To Next Page
Loading...
