PROBE TEMPERATURE
TIMER
LP TANK GAUGE
Set
Start
Stop
C
˚
F
˚
Temp
Timer
Temp
Timer
167
10:30
F
0
Power/ BackLight: To power
the unit On/Off. Also, to turn
On/Off the LCD Control Panel
backlight for evening cooking.
Temperature °C/°F: Unit offers the
option of changing temperature to
either Centigrade or Fahrenheit.
Start/ Stop: To Start the timer
function during cooking or to stop
the timer function.
Up Temp/Timer: this button is used for setting up the
temperature variable and increasing temperature set
and timer. To set temperature, hold this button down
for 3 seconds.
Down Temp/ Timer: this button is used
for setting the timer variable and decreasing
the temperature set and timer. To set timer,
hold this button down for 3 seconds.
Gas Tank Gauge Indicator
The LP Gas Cylinder has been
split up into 5 equal capacity
measurements, each of which
measures approximately 20%
of the entire cylinder
(approximately 4.2 pounds
each).
Buzzer will sound when the
level reaches the last 20% of
fuel.
See product guide for additional information on the Digital Display Panel
Digital Display Panel
Thermometer
1. Temperature set-up value is from 0-499°C or 32-931°F.
2. When inputting temperature, if the buzzer sounds and LCD display begins to blink please
re-set your temperature value ensuring that you have chosen the correct temperature
measurement, and that the temperature is not set beyond the ranges shown in point 1.
3. When using the temperature probe always ensure that you are inserting into the thickest
portion of the meat. If the buzzer sounds during use of the temperature probe this will
indicate that either you have reached or gone beyond the set temperature. The buzzer will
sound every 3 seconds.
Available only on certain models.
To Next Page
Loading...
Need help?
General
