52
Troubleshooting Product Manual - Trifecta
®
XPro Series
Bulk Tank
Pressure (Analog Gauge) __________ PSIG
Pressure (from PLC Display) __________ PSIG
Tank 1
Pressure (Analog Gauge) __________ PSIG
Pressure (from PLC Display) __________ PSIG
Liquid Level (from PLC Display) __________ “H
2
0
Liquid Level (from Analog Gauge) __________ “H
2
O
Tank 2
Pressure (Analog Gauge) __________ PSIG
Pressure (from PLC Display) __________ PSIG
Liquid Level (from PLC Display) __________ “H
2
0
Liquid Level (from Analog Gauge) __________ “H
2
O
PLC Information
Press left arrow/record PB Set Point __________ PSIG
Press up arrow/record Fill Set Point __________ “H
2
0
Press down arrow/record bulk critical __________ PSIG
Cycle Count (if equipped with counter) __________ #cycles
Press”OK”/record Error Codes and elapsed time since event:
P _____ M _____ A _____ B _____
C _____ D _____ E _____ F _____
When __________ hr __________ minute
Note that the transmitter and gauge readings may not match exactly. A discrepancy can be caused by either the analog gauge
or by the transmitter.