4
Introduction Product Manual - Trifecta
®
XPro Series
system to:
• Build pressure in the transfer tanks using gravity and
ambient coils.
–
building coils.
–
require de-icing of the pressure building system or the
addition of higher capacity vaporizers.
•
the use point.
– The vaporizer must be sized for the geographical
–
coils will reduce the performance.
•
prior to the primary tank emptying.
–
– Special care must be given in selection of the bulk
tank that supplies the Trifecta.
– The tanks heat leak performance is critical in
transferring cryogen in the liquid state to the Trifecta.
– Liquid use lines and valves out of the bulk tank must
be sized properly. Small restrictive liquid lines and
– The pressure building system of the bulk tank
needs to be sized to build tank sub-cool. The sub-
cool condition (pressure above the liquid saturation
the liquid state as it travels to the Trifecta.
– Liquid feed lines from the bulk tank to the Trifecta
losses. Take great care in laying out your Trifecta
system. Insulating the liquid feed line will reduce its
reduced losses.
To Next Page
Loading...