Intelect
®
Advanced Vacuum Electrode Module
12
OPERATION
Vacuum Electrode Module (continued)
Setting up Waveform Parameters
No waveform parameters or selections
can be made with the Vacuum Module.
Refer to the Intelect Advanced Therapy
System User Manual, part number
27429, for all waveform selection and
parameter setting instructions.
NOTE:
Combination Therapy, sEMG and
sEMG + Electrical Stimulation
Therapy cannot be administered
using the Intelect Advanced Vacuum
Electrode Module. These modalities
are administered using the Intelect
Advanced Therapy System only. Refer to
the Intelect Advanced Therapy System
User Manual, part number 27429.
To Next Page
Loading...
Need help?
General
