Intelect
®
Advanced Vacuum Electrode Module
2
ELECTROTHERAPY
• Read, understand and practice the precautionary and operating
instructions. Know the limitations and hazards associated with using
any electrical stimulation device. Observe the precautionary and
operational decals placed on the unit.
• The Intelect Advanced Vacuum Electrode Module is designed to
operate only when properly installed in the Intelect Advanced
Therapy System Cart and properly connected to an Intelect
Advanced Therapy System.
• DO NOT operate the system in an environment of shortwave
diathermy use.
• DO NOT use sharp objects such as a pencil point or ballpoint pen to
operate the buttons on the control panel as damage may result.
• This unit should be operated, transported and stored in
temperatures between 15° C and 40° C (59° F and 104° F), with
Relative Humidity ranging from 30%-60%.
• Before each use, inspect Vacuum Electrode Cups and Lead Hoses
for cracks and damage which may not allow the vacuum to properly
secure the electrodes.
• The Intelect Advanced Vacuum Electrode Module is not designed to
prevent the ingress of water or liquids. Ingress of water or liquids
could cause malfunction of internal components of the system and
therefore create a risk of injury to the patient.
• Drain the Vacuum Electrode Module water reservoir regularly to
prevent excessive accumulation from electrode sponge water.
• Periodic flushing of the system and reservoir are required to
maintain Factory functionality of the Vacuum Electrode Module.
Refer to the Maintenance Section of this manual for proper instructions.
Text with a “CAUTION” indicator will explain possible Safety infractions
that could have the potential to cause minor to moderate injury or damage
to equipment.
Text with a “WARNING” indicator will explain possible Safety infractions
that will potentially cause serious injury and equipment damage.
Text with a “DANGER” indicator will explain possible Safety infractions
that are imminently hazardous situations that would result in death or
serious injury.
NOTE: Throughout this manual “NOTE” may be found. These notes are
helpful information to aid in the particular area or function being described.
PRECAUTIONARY INSTRUCTIONS
The precautionary instructions found in this section and throughout this
manual are indicated by specific symbols. Understand these symbols and
their definitions before operating this equipment. The definition of these
symbols are as follows:
DANGEROUS VOLTAGE
Text with a “DANGEROUS VOLTAGE” indicator serves to inform the
user of possible hazards resulting in the electrical charge delivered to
the patient in certain treatment configurations of TENS waveforms.
To Next Page
Loading...
