What to do if the Chattanooga Intelect Advanced Control Unit vacuum stops and all three vacuum mode LEDs are flashing?
If the Chattanooga Control Unit vacuum stops and all three vacuum mode LEDs are flashing, it indicates that the reservoir is full. To resolve this, drain the reservoir.
General| Model | Intelect Advanced Series |
|---|---|
| Ultrasound Frequency | 1 MHz and 3 MHz |
| User Protocols | Yes |
| Multilingual Software | Yes |
| Display | LCD |
| Waveforms/Modalities | TENS, Microcurrent, Premodulated |
| Ultrasound Duty Cycles | 20%, 50% |
| Stimulator Channels | 4 |
Details safety symbols, warnings, and precautions for operating the Intelect Advanced Vacuum Electrode Module.
Provides instructions for installing and connecting the Vacuum Electrode Module to the Therapy System Cart.
Explains how to turn the module on/off, adjust vacuum intensity, and select vacuum modes.
Provides context for troubleshooting and directs users to system manuals for broader issues.
Instructions for cleaning the exterior of the vacuum module using appropriate cleaning agents.
To Next Page