Need help?Do you have a question about the Chauvin Arnoux F09 and is the answer not in the manual?
General| Model | F09 |
|---|---|
| Brand | Chauvin Arnoux |
| Type | Clamp Meter |
| Measurement Functions | AC Voltage, DC Voltage, Resistance, Continuity, Frequency |
| Continuity | Yes |
| Safety Standard | IEC 61010-1, 600V CAT III |
Describes important symbols used in the manual and on the device.
Explains the meaning of the CAT III rating for installation category.
Lists essential safety guidelines for operating the clamp meter.
Details the physical components like jaws and the rotary switch.
Explains the actions and operations of various command keys.
Specifies the environmental and electrical conditions for accurate measurements.
Instructions and specifications for measuring AC and DC voltage.
Procedures for continuity testing and resistance measurements.
Steps for testing semiconductor junctions with specific parameters.
Instructions and specifications for measuring AC and DC current.
Explanation of the INRUSH function for motor start-up currents.
Procedures for measuring active, reactive, and apparent power.
How to measure and interpret the power factor.
Method for measuring signal frequency in V, A, and W functions.
Procedure for determining phase rotation direction using 2 cables.
Details various additional functions like display lock and auto-off.
Physical attributes of the device including size and mass.
Specifies the maximum conductor size that can be clamped.
Information on the battery type, life, and status indicator.
Recommended temperature and humidity ranges for operation.
Lists the safety and electromagnetic compatibility standards met.
Details how performance varies with changes in operating conditions.
Specifies the limits for operation and storage conditions.
Step-by-step guide to safely replace the device's battery.
Advice for proper storage of the instrument when not in use.
Methods for cleaning the device and its jaws.
Information on calibration checks and repair procedures.
To Next Page
