Configuring Through a Web Browser
CHCNAV i50 GNSS USER GUIDE | 2018-11 P a g e | 63
5.8.5 User Log Submenu
5.8.6 Firmware Update Submenu
Use this submenu to load new firmware to the receiver across the network. Tap the
Browse button to locate the upgrade file → tap Confirm button to confirm the selected
upgrading file and start upgrading.
Notes
• It may take about 3 or 4 minutes to complete the firmware upgrading. Do not
touch the power button or unplug the power until the upgrading process is
finished, or damage will be caused to the receiver.
• The receiver will restart after the firmware upgrading is done, so users need to
reconnect the receiver with your computer via Wi-Fi, and then log-in the
receiver through a web browser to continue the configuration.
To Next Page
Loading...
