Introduction
CHCNAV i50 GNSS USER GUIDE | 2018-11 P a g e | 7
1 Introduction
The i50 GNSS Receiver User Guide describes how to set up and use the CHC® i50 GNSS
receiver.
In this manual, “the receiver” refers to the i50 GNSS receiver unless otherwise stated.
Even if you have used other Global Navigation Satellite Systems (GNSS) products
before, CHC recommends that you spend some time reading this manual to learn
about the special features of this product. If you are not familiar with GNSS, go to
www.chcnav.com for an interactive look at CHC and GNSS.
1.1 Safety Information
1.1.1 Warnings and Cautions
An absence of specific alerts does not mean that there are no safety risks involved.
A Warning or Caution information is intended to minimize the risk of personal injury
and/or damage to the equipment.
WARNING - A Warning alerts you to a potential misused or wrong setting of the
equipment.
CAUTION - A Caution alerts you to a possible risk of serious injury to your person
and/or damage to the equipment.
1.1.2 Regulations and Safety
The receivers contain a built-in wireless modem for signal communication through
Bluetooth® wireless technology or through external communication datalink.
Regulations regarding the use of the wireless modem vary greatly from country to
country. In some countries, the unit can be used without obtaining an end-user license.
However, in some countries, the administrative permissions are required. For license
information, consult your local dealer. Bluetooth® operates in license-free bands.
Before operating a i50 GNSS receiver, determine if authorization or a license to operate
the unit is required in your country. It is the responsibility of the end-user to obtain an
operator's permit or license for the receiver for the location or country of use.
To Next Page
Loading...
