Check Point L-71 - Viewing Active Connections; Viewing Monitoring Data; Viewing Reports; Using System Tools

Appliance Configuration
Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 113
Field
Description
Community Name If the gateways are part of a community configured by Cloud
Services, this column shows the community name with which the
tunnel is associated.
Status VPN tunnel status indication.
To filter the list:
In the Type to filter box, enter the filter criteria.
The list is filtered.
To refresh the list:
Click Refresh to manually refresh this page with updated tunnel information.
Note - This page is available from the VPN and Logs & Monitoring tabs.
Viewing Active Connections
The Logs & Monitoring > Connections page shows a list of all active connections.
The list shows these fields:
• Protocol
• Source Address
• Source Port
• Destination Address
• Destination Port
To filter the list:
In the Type to filter box, enter the filter criteria.
The list is filtered.
To refresh the list:
Click the Refresh link.
Viewing Monitoring Data
See Viewing Monitoring Data (on page 51).
Viewing Reports
See Viewing Reports (on page 53).
Using System Tools
See Using System Tools (on page 54).