Check Point L-71 - SmartProvisioning; Creating a Gateway

Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 28
C H A P TE R 5
SmartProvisioning
In This Section:
Creating a Gateway.............................................................................................. 28
Creating a SmartLSM Appliance Cluster .............................................................. 30
Defining SmartLSM Gateways Using LSM CLI ...................................................... 32
Managing Device Settings .................................................................................... 32
You can create a Security Gateway or cluster object out of SmartLSM profiles in
SmartProvisioning.
You can also manage device settings such as Hotspot, RADIUS, and Internet options.
Creating a Gateway
Make sure you define a SmartLSM gateway profile in SmartDashboard before you create a
gateway in SmartProvisioning.
To create a new gateway:
1.
Open SmartProvisioning.
2.
In the Devices page, right-click an empty row in the table and select New SmartLSM > Small
Office Appliance Gateway.
The SmartLSM Security Gateway General Properties page opens.
General Properties
1.
Enter a Name for the SmartLSM Security Gateway. It cannot contain spaces or
non-alphanumeric characters.
2.
Enter an optional Comment that identifies the SmartLSM Security Gateway.
3.
Click Next.
More Information
1.
In SmartLSM gateway, select the firmware version of the installed Check Point Appliance.
2.
In Security Profile, select the relevant SmartLSM gateway profile that the SmartLSM Security
Gateway is mapped to.
3.
In OS, select the operating system of the gateway. Make sure the selection fits the hardware
type.
4.
In Enable Provisioning, select this checkbox to enable this gateway to be managed with
provisioning configurations. For more information, see Managing Device Settings (on page
32).
5.
In No Provisioning Profile, select this option if you want to enable provisioning but are not yet
ready to assign a specific profile.
6.
In Provisioning Profile, select the provisioning profile to assign to this gateway, from the list of
profiles created in SmartProvisioning.
7.
Click Next.