Checkpoint Evolve F10 - User Manual

Evolve F10
Installation Manual
Document Version *60
P/N 10034505

Summary

Chapter 2: Site Survey and Planning

Site Survey Overview and Interference Assessment

Covers site assessment, antenna placement, and minimizing interference from surrounding elements.

Chapter 3: Physical Installation Procedures

Installation Requirements, Outline, and Antenna Setup

Floor Cut Details and Mounting Components

Chapter 4: System Wiring Guide

Antenna, Coax Cable, and 2 x1 Meter Wiring

Wiring Power Supply, Alarms, and Sync

Chapter 5: F10 System Configuration via DMS

DMS Setup, Connection, and Basic Configuration

Guides on connecting to the TR4215 board using DMS and setting up system parameters.

Detection Modes, Alarms, and SAM Configuration

Explains application-based modes, alarm severity, and configuring Smart Alarm Management (SAM).

Pattern, Matrix Configuration, and System Update

Details configuring alarm patterns, matrices, and updating system settings via DMS.

Chapter 6: Tuning Procedures and Noise Mitigation

Tuning Overview, TR4215 Features, and Basic Methods

Noise Sources and Analog View Tuning

Explains identifying noise sources and using Analog View for initial tuning adjustments.

Resonance Remediation, Jammer Indication, and Data Retrieval

Covers methods for remedying resonances, jammer indication, and retrieving system data.

Checkpoint Evolve F10 Specifications

General

Brand	Checkpoint
Model	Evolve F10
Category	Antenna
Language	English