Checkpoint Evolve F10 - Alarm; Navigating to the SAM Screen; C Onfiguring Sam (S Mart a Larm M Anagement )

F10 Installation Manual Rev. *60 47 of 71
Table 5.1 Alarm Priority Descriptions
Configuring SAM (Smart Alarm Management)
This chapter details the steps and options for configuration of the Smart Alarm Management
(SAM) system in DMS.
Note: For information on installation and use of the DMS system, refer to the Field Service Diagnostic
Management User’s Guide.
Navigating to the SAM Screen
1. DMS should still be connected to the desired TR4215 reader.
2. Navigate to the Access screen (shown in Figure 5.9), which describes the current settings for
the antenna(s) in the group.
Note: Although previous Liberty systems required the "TR4024/26" Device setting in the DMS Connection
Settings window, NGL uses the "Evolve" Device connection.
Frequency Band
Tag
Frequency
Alarm
Severity
Tag
Frequency
Alarm
Severity
Primary
Secondary
Standard: 8.2
8.2
M
-
-
Library: 9.5
9.5
M
-
-
Immunity: 8.2
8.2
M
-
-
Corral: 8.2, 9.0
8.2
M
9.0
H
Rev Corral: 9.0, 8.2
9.0
M
8.2
H
Apparel: 8.2, 9.2
8.2
M
9.2
H
Japan1: 8.2=9.5
8.2
M
9.5
M
Japan2: 8.2, 9.5
8.2
M
9.5
H
Pharma: 8.2, 7.2
8.2
M
7.2
C
RazorKeeper: 8.2, 7.2
8.2
M
7.2
H