Service and Maintenance
Seat Belt
Be sure to use seat belt or child safety seat at any moment. One seat belt can not be shared by more than one people. Make sure the seat belt
has been properly fastened without slackness, twist and obstacle.
SEAT BELT WARNING LIGHT
This light should light when ignition switch is turned on, and then it should keep lighting to remind passengers to fasten seat belts. After
driver seat belt has been properly fastened, this light should go out.
Fastening Seat Belt
Smoothly draw out the seat belt. If you apply too large force or the vehicle is on a slope, the seat belt may lock up. The seat belt should be
placed at center of outer shoulder. The lap belt should be snug on hip other than stomach.
To loosen the seat belt, press down the red button on the buckle and let the seat belt smoothly retract.
Make sure every seat belt uses correct buckle.
If your articles need to be
placed inside the vehicle, please fix
the articles that may affect safety at a
safe place in the vehicle.
To Next Page
Loading...
Need help?
General
