INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
POWER WINDOW
Left Front Door
BACK DOOR
The power window can operate only when
the ignition switch is at ON position.
All windows can be operated through the
window regulator control switches on their
respective door interior trim panels.
The window can be opened or closed by
depressing or raising its control switch.
During the ascending or descending of
window glass, if the switch is released, the
window glass will stay at the current
position.
The window lift control switch has delay
function, namely, it can still operate within
60 seconds after pulling out the key.
The glass switch of each door has
touching function when the door window
is falling, i.e. the glass can automatically
fall to bottom after you touch the falling
switch for 300ms and then let go of it.
The control switches of other three
windows are available on the door trim
The object image in exterior
rear view mirror looks a little smaller
and farther than that of the actual
object. Take care not to overestimate
actual distance of the object.
To Next Page
Loading...
