INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
Cold air/warm air
adjusting switch
It is used to control temperature of the air
flowing out of vent.
Blue position: cold air
Red position: heating
Blower switch
The blower switch is used to control speed
of the blower (4 positions in total). Wind
speed is adjusted using the blower. In
order to improve comfortability, please
turn on the blower when traveling.
Internal/external
Recirculation Switch
It is used to select the fresh air outside the
vehicle or the recycling air inside the
vehicle.
External recirculation mode (
working indicator light goes out)
The air outside the vehicle will enter
inside of the vehicle.
It used for normal ventilation, warm wind
and cooling.
Internal recirculation mode (
Continuously working
under internal recirculation mode will
make inside of the vehicle sultry and
make window glass generate fog;
therefore, only use this mode in
short-term.
To Next Page
Loading...
