INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
AIRFLOW
DISTRIBUTION
The air flow and direction can be adjusted
by means of the button on the air
conditioner control panel and the control
device of side ventilator and central
ventilator.
When adjusting the vent (adjust as
required), note that the blockage in tunnel
and vent will weaken air output.
CENTRAL
VENTILATOR AND
SIDE VENTILATOR
Central vents and side vents are bilaterally
symmetrical.
The switch knob has the function of
opening and closing vent and adjusting
wind direction together; customers can
adjust opening and wind direction at each
vent as required.
MAXIMUM AIRFLOW
Adjusting A/C mode knob to Blow Foot or
Defrosting allows maximum airflow to
flow towards foot pedal area or
windshield.
To Next Page
Loading...
