BRIEF INTRODUCTION
7
Equipment marked with asterisk
symbol is only fitted on vehicles
having certain construction and produced
in batch, and is only optional for several
vehicle types or vehicles supplied to
certain markets.
In the event that this symbol is
seen in your vehicle, you must
first of all read the related chapters in this
manual before operating your vehicle.
We must exercise our obligatory
responsibility and duty in the
environmental protection. To realize this
objective, you should take important
measures properly operating your vehicle
and disposing of cleaning products and
lubricating materials in line with laws. In
this manual, the tree-shaped symbol is
used to highlight this kind of information.
Inspection of new
vehicle
Before delivering the vehicle to you, the
dealer of Chery has performed inspections
to the vehicle as required by Chery
Automobile Co., Ltd. The dealer should
fill in date of delivery in the column of
“Inspection Proof at Delivery” in this
manual and stamp its official seal.
The dealer will make clear the
performance of the finished vehicle to you
according the Vehicle Delivery Card of
Chery Automobile and give you the
general knowledge of vehicle operation,
and the sales clerk and customer will sign.
Running in of new
vehicle
Owing to the error of machining and
assembling, at the initial period of
operation the frictional resistance between
each pair of moving parts in new vehicle is
much bigger than that in normal condition.
The result of running in of new vehicle
will produce great influence on the service
life and operating reliability and
economical efficiency of vehicle, therefore
the regulation of running in must be
strictly kept in the operation of new
vehicle.
Regulation of running
in within 1,000 km:
Driving at full speed is absolutely
To Next Page
Loading...
Need help?
General
