INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
Only by placing the ignition switch at ON
position can the wiper motor operate. The
front wiper has four positions; when not in
use, it stops at OFF position.
INTERMITTENT WIPE
Shift wiper switch up once from “OFF”
position to “INT” position.
At intervals, the wiper will scrape on the
windshield for several times.
REGULAR WIPE
Shift wiper switch up twice from “OFF”
position to “LO” position.
HIGH-SPEED WIPE
Shift wiper switch up thrice from “OFF”
position to “HI” position.
WATER-JET SWITCH
In cold season, be sure to
check if wiper blade is frozen to
windshield before using wiper. If
so, be sure to thaw it first be using,
otherwise wiper motor may be
damaged.
Operating wiper with such
obstacles as snow etc. on
windshield may also damage wiper
motor.
Before operating wiper, please clear
obstacles away first.
Do not operate wiper on dry
windshield, otherwise glass may be
scratched and permanent damage
may be made to wiper blade.
To Next Page
Loading...
Need help?
General
