In Brief 1-5
Remote Start
Use remote start to heat or cool the
interior when the vehicle is plugged
in to maximize electric range by
utilizing electricity from the wall
outlet. The engine may start to
support the climate control
operation. Normal operation of the
system will return after the vehicle
has been turned on.
Activating the Remote Start
1. Aim the RKE transmitter at the
vehicle.
2. Press
Q on the RKE transmitter;
the doors will lock.
3. Within five seconds, press and
hold
B until the turn signal
lamps flash, or for approximately
four seconds. Pressing
B again
during a remote start will turn the
feature off.
After entering the vehicle during a
remote start, press the POWER
O
button on the center stack with the
brake pedal applied to operate as
normal.
Canceling Remote Start
To cancel a remote start, do any of
the following:
.
Aim the RKE transmitter at the
vehicle and press and hold
B
until the parking lamps turn off.
.
Turn on the hazard warning
flashers.
.
Press the POWER O button on
the center stack, with the brake
pedal applied, then press the
POWER
O button again to turn
the vehicle off.
See Remote Start on page 2‑8.
Door Locks
Keyless Access
The RKE transmitter must be within
1 m (3 ft) of the door being opened.
To unlock the door from the driver
door, press the lock/unlock button
on the door handle. Press again
within five seconds to unlock all
passenger doors.
To Next Page
Loading...
