2-8 Keys, Doors, and Windows
To start the vehicle:
1. Open the instrument panel
storage and remove the
rubber mat.
2. Extend the key blade and place
the blade into the slot.
3. With the vehicle in P (Park) or
N (Neutral), press the brake
pedal and the POWER
O button
on the center stack. See Power
Button on page 9‑18 for
additional information.
Replace the transmitter battery as
soon as possible.
Battery Replacement
Notice: When replacing the
battery, do not touch any of the
circuitry on the transmitter. Static
from your body could damage the
transmitter.
To replace the battery:
1. Extend the key blade and open
the battery cover on the back of
the unit.
2. Remove the used battery. Avoid
touching the circuit board to
other components.
3. Insert the new battery, positive
side facing down toward
the base.
4. Reassemble the battery cover.
5. Check the operation of the
transmitter with the vehicle.
Remote Start
This feature starts the heating or air
conditioning systems and rear
window defogger from outside the
vehicle. Use remote start to heat or
cool the interior when the vehicle is
plugged in to maximize the electric
range by utilizing electricity from the
electrical outlet. Normal operation of
the system will return after the
vehicle has been turned on.
B (Remote Start): This button is
on the RKE transmitter.
During remote start:
.
The climate control system will
typically default to the last
climate settings. If the fan is off
or if Fan Only was selected, the
air conditioning or heat will turn
on as needed. See Automatic
Climate Control System on
page 8‑1 for more information.
To Next Page
Loading...
