Requirement
s for
Installation
Position
The installation shall be operated at the place which is solid, unlikely subject to
shock and able to bear the weight of machine.
The outdoor unit shall be installed at the place which with good ventilation, and
unlikely subject to rain or direct sunshine. Ensuring that the air conditioner can be
easily accessed for maintenance and repair.
Keep the indoor and outdoor units as close as possible. The connection pipe shall be
short as it might be.
To facilitate the air flow, keep adequate space around the indoor and outdoor unit,
and avoid flammable or corrosive gas nearby. The drainage shall not affect the
constructions of dwellers underneath or the user himself.
The machine shall be kept 2m or more away from the electric appliances and heat
source.
Avoid TV set, sound box, computer and other deluxe home appliances below the
indoor unit.
The indoor unit shall be able to blow the cold and hot air evenly to everywhere of
the room.
According to the power supply mode (powered by indoor or outdoor unit) and the
length of power cable, select the position which close to the power supply, in order
to facilitate the connection of power line. Moreover, ensuring that it is not needed to
extend the power cable and selecting a position beyond reach of children.
Determinatio
n of
Installation
Position
Select the final position of indoor and outdoor unit according to the requirements
above (Mark properly if needed).
6、 Execution of Installation
Installation of
Wall-mounted
indoor unit
Unpack the machine and take out the accessories, wall-mounting plate and
remote controller. Mount the bundled batteries into the remote controller and
observe for abnormality. Before installation, make sure to energize the indoor
unit and test it by using the remote controller. Observe the fan and swing
louver for their working conditions. If any abnormality occurs, adjust
immediately and install again.
To Next Page
Loading...
Need help?
General
