Lever, the Decompression Valve and the kill Switch all function well without failure.
.
as necessary so
ef. Fig.2)
. Check to make sure the V-belt is properly
y and clean.
und or if it’s not completely and securely
assembled and properly adjusted.
5. Precautions on starting:
rope around your hand.
Fig 2
16
Check to make sure the blade guard has no
visual damage. Adjust the guard
the spark beam generated during cutting can be
directed away from the operator. (R
tensioned.
. Make sure the saw is free of oil spillage.
. Make sure the main cover and the handles are dr
. Do not attempt to start the saw if damage is fo
. Keep a good balance and secure footing.
. Take hold of the st e arter grip firmly; do not wrap th
To Next Page
Loading...