. To start, place the machine firmly against
the ground and make sure the blade is not in
contact with the ground or the object to be
cut.
. Pull sharply on the rope and guide it back
y
6. Pr
. Keep a good balance and secure footing while holding the saw firmly at all times.
. ake the engine accelerate gradually.
beginning to work.
de slowly toward the object to be cut, increase the pressure
ter the cutting edge comes in contact with the o Make sure the
.
slowly. Do not let go of the grip halfwa
through the pull to prevent it from snapping
back.
ecautions on operation:
Fig 3
17
(Ref. Fig.3)
Press the throttle trigger backward slowly to m
Wait until the blade builds up the rpm’s before
. Move the rotating bla
gradually af
cutting depth is appropriate
bject.
To Next Page
Loading...