. Do not change direction of the cut or twist during the cut as this may produce a high
orsion load o
t n the blade and may cause it to break or shatter. Only move the machine
.
ake sure it won’t hit any part of your body or pinch the
t at this time. so
e or
n angle or push it into the cut as this may result in a
along a straight line, forward or “to and fro” in the cutting direction.
When cutting, position the saw at an appropriate distance so that your body is clear of
the blade attachment yet you don’t have to overreach.
. Release the pressure on the saw when the blade completes a cut. The cut-off portion
of the object may drop, so m
blade. .
. Whenever you hear an abnormal sound coming out of the cut-off saw, stop cutting
immediately for inspection (Note the muffler and the blade are very ho
take care not to get burned). Only resume work after the trouble is eliminated
. Do not make adjustments or any other maintenanc
troubleshooting with the cut-off saw while it is running.
. Take precaution when re-entering a cut and do not turn the
blade at a
pinching of the blade.
18
To Next Page
Loading...