7. P
. ne cool off naturally. Do not take any other forceful
sure build-up in the tank to
y after fueling and clean off spillage if any.
have your body get
t
or repair work in clean and neat environment. Use proper tools
a
. Use only identical spare parts for
recautions on fueling:
. Fuel the machine only in a well-ventilated environment.
Before refueling, let the engi
measures to cool the engine down.
Remove the fuel tank cap carefully so as to allow any pres .
release slowly. (Ref. Fig.4)
. Tighten fuel cap securel
Fig. 4
8. Notes on transporting:
. Always stop the engine before relocating the saw.
19
.When carrying the machine with a hot engine, take care not to
burned by the muffler.
. Prevent the saw from touching the ground or any hard objects
s on No e maintenance:
Perform any maintenance
nd operate with caution.
9. Do not attempt to modify your cut-off saw in any way
To Next Page
Loading...