prevent it from wearing.
. After the rope has been pulled through:
a. If the engine does not start, press the button of the decompression valve again and
restart the engine.
b. If the engine runs for a while but doesn’t keep running, press the decompression
e in, move the choke lever to
and then restart the engine. valv
c. As soon as the engine is running, briefly blip the throttle trigger (3) at once. The full
he engine idles.
into the fuel line and
th
throu
rottle lock button (4) reverts to its original position and t
. If the engine is new, or has been stored for a long period of time, pull the starter rope
gh several times to ensure that sufficient fuel is delivered
combustion chamber of the engine.
28
To Next Page
Loading...